ePMP 2000 5GHz Connectorized Access Point with Intelligent Filtering and GPS Sync - RoW. US Power Cord
ePMP has set the standard for high-performance, scalability, and reliability in harsh interference environments al l at a compelling price. ePMP 2000 is the next-generation Access Point bringing interference tolerance to a whole new level with unique Hypure[tm] technology, which combines Intelligent Filtering and Smart Beamforming to deliver new levels of performance in the face of interference. The ePMP 2000 System consists of a high-performance, GPS Synchronized Access Point (AP) Radio with Intelligent Filtering, a new compact high-performance Sector Antenna, and an optional Smart Antenna.
Intelligent Filteringimproves both receive and transmit performance. It protects the network from off-channel interferers with a filter that dynamically moves around the channel. On the transmit side, it protects the RF environment by reducing off-channel transmission noise.
Smart Beamforming drastically reduces the effects of on-channel interference. The System learns the locations of each served Subscriber Module (SM) and forms a narrow beam toward the desired SM while that radio is transmitting in the uplink. This reduces the gain on the uplink for on-channel interferers that are transmitting at an azimuth angle different than the SM, delivering performance gains never before seen.
Key Advantages
Industry-Leading Interference Tolerance: Intelligent Filtering hardens ePMP 2000 to strong off-channel interferers and reduces off-channel noise for better radio co-location. Smart Beamforming with the optional Smart Antenna delivers dramatic performance improvements when dealing with strong co-channel interference.
Frequency Reuse: GPS Synchronization and Transmit Power Control al low for industry-leading frequency reuse.
Unmatched Performance and Scalability: With the efficient ePMP MAC protocol and advanced air-fairness scheduler, up to 120 simultaneously active Subscriber Modules can be served without performance degradation.
Cambium Networks has deployed more than five million radios around the world achieving unparalleled degrees of scalability. Based on this vast experience, Cambium Networks has designed an antenna solution that enables network operators to increase the spectral efficiency and scale of their ePMP point-to-multipoint (PMP) distribution access networks.
Wireless Service Providers deploying networks in 5 GHz spectrum will find this sector antenna for 90° and 120° applications especially well-suited for high-density networks requiring frequency re-use and wide-band spectrum coverage.
Frequency Reuse: Designed for ABAB channel re-use (two channels covering four sectors), the sector antenna has 35 Db front to back ratio including a wide aperture in the rear-facing direction.
Channel Flexibility: Consistent gain from 4.9 to 6.0 GHz allows the operator to select a channel anywhere in the band and achieve the expected performance.
Consistent Coverage: Excellent null fill capabilities of the antenna allow for broad geographical coverage within a sector even near the base of the tower and the edges of the sector.
Designed for the Installer: Small compact design, integrated ePMP radio mount and GPS antenna integration.
Predictable Performance: The sector antenna is integrated into Cambium Networks LINKPlanner. The 3D model shows coverage at all elevations and across the azimuth.
Model: C050900A131A
SPECTRUM
Channel Spacing: Configurable on 5 MHz increments
Frequency Range: 5150 - 5970 MHz (exact frequencies as allowed by local regulations)
Channel Width: 5 I 10 I 20 I 40 MHz
INTERFACE
MAC (Media Access Control) Layer: Cambium proprietary and optionally standard 802.lln
Physical Layer: 2x2 MIMO/OFDM
Ethernet Interfaced: 100/lOOOBaseT, rate auto negotiated, 802.3at compliant
Powering Methods Supported: 56 V PoE (included), standard 802.3at PoE Supply, or CMM4 with 56 V and 5 pin to 7 pin cross over cable adapter
Mounting Hardware: Included for mounting to mast diameters 2" to 4" (5 cm to 10 cm), -10 to +5 degree tilt, Hardware included to connect ePMP access point to back of antenna body
Physical Dimensions (Antenna Body): 23.4" (H) x 6.2" (W) x 4.3" (D) (584 mm x 157 mm x 110 mm)
Physical Dimensions (with ePMP 1000 Access Point): 23.4" (H) x 6.2" (W) x 5.9" (D) (593 mm x 157 mm x 150 mm)
Weight: Antenna Body: 8.8 lbs. (4.0 Kg). With ePMP 1000 Access point and Mounting Brackets: 14.6 lbs. (6.6 Kg)
Environmental: IP65
Radome Material: UV Protected ABS
Operating Temp: -40°C to 60°C (-40°F to 140°F)
Flytec Computers Customer Reviews
This Part Includes:
Qty: 1 x Part: C050900A131A
Cambium ePMP 2000 5GHz Connectorized AP with Intelligent Filtering and GPS Sync (RoW)(US Power Cord)