Bring next-generation wireless performance to your remote rooms via electrical wiring. Comtrend’s PG-9172AC is a G.hn-based powerline device with the added benefit of 802.11ac WiFi connectivity.
Using existing electrical wiring and powerline technology, you can get WiFi connectivity to hard to reach locations without the weakened signal of a wireless extender. With advanced WiFi OptimizAIR 2.0 technology, the PG-9172AC delivers higher capacity and superior QoS for optimized video streaming.
Easily add on to or create your G.hn Powerline Network—connect up to 16 G.hn Powerline Adapters (a minimum of two devices is required).
RJ-45 X 1 for Gigabit Ethernet Connection
LED: LAN, 2.4GHz, 5GHz, PLC,
POWER Button: WiFi On/Off, WPS, PLC Sync, PWR, RESET External WiFi Antenna x 2
Standard IEEE 802.3 10/100/1000Mbps
BaseT Auto-Sense Auto Rate and Duplex Negotiation
Up to 1200Mbps by WiFi Transmission
WiFi OptimizAIR 2.0 (Higher Capacity & Superior QoS) 802.11 b/g/n @ 2.4GHz, 2T2R 802.11 a/n/ac @ 5GHz, 2T2R,
External FEM Concurrent 2.4GHz & 5GHz 11 Channels (US, Canada) WPA/WPA2/Mixed WAP2+WAP
OFDM, FEC, Flexible Frequency Configuration
BPSK/QPSK/16-QAM/64-QAM for WiFI
HTTP Web-based TR-069 Supported (Single Entity for G.hn & WiFi Functions)
AES 128 Bits Encryption Ensures Total Data Security
One Button Security Set-Up
Reset Button for Factory Reset
802.1D Ethernet Bridge 802.1Q VLAN
Quality of Service (QoS)
IGMP (IPv4) Snooping & MLD (IPv6) Snooping
Built-in dual TCP/IP stack (IPv4/IPv6)
ITU-T G.9960 & G.9961 Compliant G.hn
MIMO Support NDIM Support
110-240 VAC 50Hz/60Hz
Operating temperature: 32~104F (0~40°C)
Relative Humidity: 8~95% (non-condensing)
7.08 X 5.35 X 1.61in (H x W x D)
180 x 136 x 41mm (H x W x D)
CE, FCC, HGF
Note: Specifications are subject to change without notice.