Ubiquiti Networks NBE-M5-400-US NanoBeam M Series, 5GHz 25dBi Dual, intregrated Antenna Radio with PoE.
The NanoBeam directs RF energy in a tighter beamwidth.
With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noise immunity is improved.
This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
Ubiquiti’s InnerFeed™ technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable.
This improves performance because it eliminates cable losses.
Providing increased performance from its faster processor and innovative mechanical design at a low cost, the NanoBeam is extremely versatile and cost-effective to deploy.
Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller.
This “time slot” method eliminates hidden node collisions and maximizes airtime efficiency.
It provides significant performance improvements in latency, throughput, and scalability compared to all other outdoor systems in its class.
Processor: Atheros MIPS 74KC, 560 MHz
Memory: 64 MB DDR2, 8 MB Flash(1) 10/100/1000 Ethernet PortRoHS Compliance: YesPower Supply: 24V, 0.5A PoE
Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return)
Max. Power Consumption: 6W
Operating Frequency: 5.47-5.825GHz
Max. VSWR: 2:1
Built-In Mechanical Downtilt: +20° to -10°
Output Power: 26 dBm
Wind Loading: 45 lbf @ 125 mph
Wind Survivability: 125 mph
LEDs: (1) Power, (1) LAN, (4) WLAN
Signal Strength LEDs: Software-Adjustable to Correspond to Custom RSSI Levels
Channel Sizes: 5/8/10/20/30/40 MHz
Polarization: Dual Linear
Enclosure: Outdoor UV Stabilized Plastic
Mounting: Pole-Mount (Kit Included), Wall-Mount
ESD/EMP Protection: Air: ±24 kV, Contact:± 24 kV
Operating Temperature: -40 to 70° C
Operating Humidity: 5 to 95% Non-Condensing
Shock & Vibration: ETSI300-019-1.4