L-Com AL-CAT5HPJW Outdoor High Power 10/100 Base-T CAT5 Lightning Surge Protector- RJ45 Jacks
Your price: $64.99
Availability: Usually Ships Same Business Day
The AL-CAT5HPJW is HyperLink's outdoor version of its HGLN-CAT5-HP protector. This 3-stage Lightning Protector provides superior lightning and surge protection for indoor and outdoor 10/100 Base-T Ethernet networks. Also compatible with Power-over-Ethernet (PoE) devices, this unit provides protection to both Ethernet data pairs as well as the PoE DC power feed. The unit is not compatible with inverted polarity voltage PoE equipment.
In the data path, the first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a high speed, low capacitance diode clamp array. In the power path, the first stage is comprised of a differential gas discharge tube. Stage two is a pair of filter inductors and the final stage is a pair of bi-directional clamping diodes.
The Advantage of the AL-CAT5HPJW three stage surge protector design is the added level of protection due to its large power rating and safety due to its failsafe architecture. In the event of a catastrophic surge event, the series resistors will fuse and the shunt diodes will short. This will safely disconnect the line from the datacom equipment.
Hyperlink's CAT5 Lightning Protector is compatible with Wireless Access Points, Access Servers and Outdoor Routers that support Power-over-Ethernet (PoE). A ground lug and terminal is provided directly on the lightning protector, providing superior grounding. A second ground and terminal is provided for strapping multiple units together.
For maximum protection from lightning on long cable runs, two AL-CAT5HPJW's can be used -one at each end of the cable. Most PoE capable equipment is not protected from surges on it's CAT5 cable.
The compact weather resistant housing features a lockable hinged cover and mounting holes are provided on the rear of the enclosure for mounting. The two cable grommets may be adjusted to the size of the cable used and are removable.
Three-Stage Protection, Failsafe Architecture
10/100 Base-T CAT5 protection
Supports PoE mode B for power
Impact and weather resistant enclosure with locking hinged cover