The AirCam from Ubiquiti Networks was designed to be a part of the Ubiquiti airVision IP camera management system. Multiple cameras can be managed using the airVision NVR or server (both available separately) with the airVision software. The airVision IP camera management system can be accessed wirelessly via mobile devices when paired with the airMax series devices (sold separately).
This pack of airCam 1MP Outdoor Bullet Cameras contains three cameras that each have a 1/4" progressive-scan RGB CMOS sensor and a 4mm fixed lens to capture high-quality video at 30 fps in H.264 compression.
The cameras come with a PoE adapter so that you can power the units from the network itself without requiring any extra wiring for auxiliary power outlets. They can be mounted on a wall or a ceiling using the included wall/ceiling adapter kits.
Model: airVision-C NVR
The UniFi NVR is a plug-and-play NVR appliance with low power consumption. The UniFi Video software is pre -installed for quick and easy deployment. No additional software is required. Plug it into the network, go through the configuration wizard, and it is set up and ready to go. The UniFi NVR with 500GB HDD from Ubiquiti Networks is capable of managing and recording from up to 50 cameras. The NVR is plug-and-play and the setup wizard automatically detects cameras for quick setup. It features the Intel D2550 Processor and 4GB of RAM as well as a preinstalled 500GB hard drive to allow you to store up to 1200 hours of video footage at 480p and up to 400 hours at 720p resolution.
The software features an advanced UI with functions such as custom motion detection zones, event recordings, email alerts, live view monitoring, disk management, and analytics. The UI can be accessed via a web browser on a Windows PC or on an iOS or Android device. It also features detailed statistical reporting, multiple views, versatile camera settings, advanced analytics, and customizable event recordings.
The ETH-SP is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. Since all Ubiquiti® airMAX® devices already have robust ESD protection built in, adding the ETH-SP to the installation provides an additional layer of protection to the network. The ETH-SP is engineered to protect Power-over-Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gbps. Two passive, surge-protected RJ45 connections provide maximum equipment compatibility.
The Ubiquiti Networks Ethernet Surge Protector safeguards your outdoor non-PoE and PoE-based systems from voltage threats such as surges and electrostatic discharge events, which can render an entire network system inoperable. This protector is suitable for use with surveillance cameras, access points, and other Ethernet-equipped devices. Ubiquiti Networks has designed it with two surge-protected Ethernet ports that support Gigabit connection speeds. Furthermore, an external housing guards the Ethernet ports along with the surge protector from outdoor elements.
The ERPOE-5 EdgeRouter PoE 5-Port Advanced Network Router from Ubiquiti Networks combines reliability with enterprise-level features. Powered by a proprietary and intuitive graphical interface, and EdgeOS, the EdgeRouter can easily be configured for routing, security, and management features to efficiently run the network.
airCam (3 Units)
Ubiquiti AirCam-3 H.264 1 Megapixel 1280x960, HDTV
Model: airVision-C NVR