Ubiquiti Bullet M2HP Plug and Go 100Mbps+ of REAL TCP/IP Throughput over outdoor multi-km links 2.4GHz Hi Power 802.11N Outdoor Radio System
Ubiquiti POE-24 24VDC 12W is an advanced power supply / power inserter.
The power supply is autoranging on the input and has a regulated voltage output.
It has overload and short circuit protection in addition to Ethernet surge suppression builtin.
The Ubiquiti POE-24 12W is not a proprietary unit.
For all models the power is supplied on ethernet pins 4/5 (V+) and 7/8 (V-).
For the models the power is supplied on ethernet pins 4/5 (V-) and 7/8 (V+).
Ubiquiti POE-24 12W come complete with a standard North American 115VAC power cord.
The power supply can be centrally located where it can be attached to an uninterruptible power supply.
The user has the ability to easily power on reset the attached equipment from a remote location.
The HyperLink Directional Mini-Reflector Grid WiFi Antenna provides 15 dBi gain with a 16° horizontal beam-width for directional applications. Its compact design makes it nearly invisible in most installations, and it can be installed for either vertical or horizontal polarization. It is ideally suited for 2.4GHz ISM band applications such as IEEE 802.11b/g/n wireless LAN systems.
This antenna's construction features a die cast aluminum reflector grid for superior strength. This antenna's 2-piece reflector grid is simple to assemble and significantly reduces shipping costs. The grid surface is UV powder coated for durability and aesthetics. The open-frame grid design minimizes wind loading.
The HG2415EG antenna is supplied with a 60 degree tilt and swivel mast mount kit. This allows installation at various degrees of incline for easy alignment. It can be adjusted up or down from 0° to 60°.
100Mbps+ of REAL TCP/IP Throughput over outdoor multi-km links
No radio card / host board issues
No RF cable quality concerns
No mechanical stability concerns
No enclosure mounting requirements
Just Plug and Go.
Processor Specs: Atheros SOC, MIPS 24 KC, 400MHz
Memory Information: 32MB SDRAM, 8MB Flash
Networking Interface: 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Approvals: FCC Part 15.247, IC RS210, CE
RoHS Compliance: YES
RF Connector: Integrated N-type Male Jack (connects directly to antenna)
Power Method: Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Carrier class power over ethernet system
Auto ranging power supply/ inserter
Built-in ethernet surge protection to prevent equipment damage
Overload and short circuit protection
Minimum cross talk and insertion loss
Advanced switching technology ? runs cool
Powers clients which accept power on unused ethernet pins 4,5,7,8
FCC and CE approved
Current indicator (CI) option available
Remote routers, access points and bridges
Remote networking equipment
IP camera systems
400MHz to 10GHz systems
IP phone systems
2.4 GHz ISM Band
IEEE 802.11b/g/n Wireless LAN Applications
WiFi Systems & Long-range Directional Applications
Point to Point Systems & Point to Multi-point Systems
Wireless Bridges, Backhaul Applications & Wireless Video Systems