Ubiquiti Bullet M2HP Plug and Go 100Mbps+ of REAL TCP/IP Throughput over outdoor multi-km links 2.4GHz Hi Power 802.11N Outdoor Radio System
Ubiquiti POE-24 24VDC 12W is an advanced power supply / power inserter.
The power supply is autoranging on the input and has a regulated voltage output.
It has overload and short circuit protection in addition to Ethernet surge suppression builtin.
The Ubiquiti POE-24 12W is not a proprietary unit.
For all models the power is supplied on ethernet pins 4/5 (V+) and 7/8 (V-).
For the models the power is supplied on ethernet pins 4/5 (V-) and 7/8 (V+).
Ubiquiti POE-24 12W come complete with a standard North American 115VAC power cord.
The power supply can be centrally located where it can be attached to an uninterruptible power supply.
The user has the ability to easily power on reset the attached equipment from a remote location.
HGV-2458-07U is an economical yet high performance dual band omnidirectional antenna designed for operation in the 2.4 GHz and 4.9/5.8 GHz frequency bands.
Compact and lightweight, these antennas are ideally suited multipoint applications where wide coverage is desired.
The HGV-2458-07U antennas feature an integral N-Female bulkhead type connector that can mount through the wall of an equipment enclosure.
Also included is a mast mounting kit which consists of a heavy-duty steel bracket and a pair of U-bolts.
This kit allows for installations on masts up to 2.0" in diameter.
A vented end cap and drain holes in the base help prevent moisture build-up inside the antenna.
These features allow the antenna to be mounted in up or down positions.
100Mbps+ of REAL TCP/IP Throughput over outdoor multi-km links
No radio card / host board issues
No RF cable quality concerns
No mechanical stability concerns
No enclosure mounting requirements
Just Plug and Go.
Processor Specs: Atheros SOC, MIPS 24 KC, 400MHz
Memory Information: 32MB SDRAM, 8MB Flash
Networking Interface: 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Approvals: FCC Part 15.247, IC RS210, CE
RoHS Compliance: YES
RF Connector: Integrated N-type Male Jack (connects directly to antenna)
Power Method: Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Carrier class power over ethernet system
Auto ranging power supply/ inserter
Built-in ethernet surge protection to prevent equipment damage
Overload and short circuit protection
Minimum cross talk and insertion loss
Advanced switching technology ? runs cool
Powers clients which accept power on unused ethernet pins 4,5,7,8
FCC and CE approved
Current indicator (CI) option available
Remote routers, access points and bridges
Remote networking equipment
IP camera systems
400MHz to 10GHz systems
IP phone systems
High Performance in a compact lightweight design
Durable UV-Stable fiberglass radome with vented end cap and drain holes in base
All weather operation
Integral N-Female connector
Includes mast mounting kit
2.4/4.9/5.1/5.3/5.4/5.8 GHz Wireless LAN systems
IEEE 802.11a/b/g/n and 802.11ac compatible
Homeland Security and Public Safety band
WiMAX and WiFi applications
Multipoint and mobile applications