TYCON POWER TP-POE-HP-48, Power Over Ethernet 48V 50W High Power POE Power Source, data-in to a shielded RJ45 Jack, accept AC inputs from 90VAC to 264VAC. Remotely Power Equipment thru CAT5 Cable up to 100m.
Your price: $48.95
Availability: Usually Ships Same Business Day
TYCON POWER TP-POE Passive Power Over Ethernet Power Sources offered by Tycon Power Systems are quality power sources for years of reliable operation even in the toughest conditions. They accept data-in to a shielded RJ45 Jack and provide surge protected data-out and power on the shielded RJ45 output jack. They work by supplying power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). For the "R" model the voltage is reversed. 4,5(V-) and 7,8(V+). The Ethernet spec supports distances up to 100m (328 feet).
The TP-POE are autoranging so that they accept AC inputs from 90VAC to 264VAC (50/60 Hz) and they supply regulated DC Voltage at the output. They have various protections for surge, short circuit, overload and overvoltage. The medium power models (TP-POE) have power output up to 24W and the high power models (TP-POE-HP) up to 100W. They are available in 18V, 24V and 48V DC Output with load regulation within 5%. The CI model has an special current sense LED which changes color when a POE device is plugged into the CAT5 cable.
If the remote device does not support power over Ethernet, splitters (POE-SPLT-S) are available to split the data and DC voltage at the remote device. If the remote device requires reverse voltage the POE-XOVER cable can be used.
Remotely Power Equipment thru CAT5 Cable up to 100m
Built in Ethernet Surge Protection
Autoranging Switching Power Supply
Short Circuit, Over Current and Over Voltage Protection